Lantronix 900-510 manual Safety Information, Safety Precautions

C: Safety Information

Safety Precautions

Please follow the safety precautions described below when installing and operating the SLB branch office manager.

Cover

Do not remove the cover of the chassis. There are no user-serviceable parts inside. Opening or removing the cover may expose you to dangerous voltage that could cause fire or electric shock.

Refer all servicing to Lantronix.

Power Plug

When disconnecting the power cable from the socket, pull on the plug, not the cord.

Always connect the power cord to a properly wired and grounded power source. Do not use adapter plugs or remove the grounding prong from the cord.

Only use a power cord with a voltage and current rating greater than the voltage and current rating marked on the SLB branch office manager.

Install the SLB device near an AC outlet that is easily accessible.

Always connect any equipment used with the product to properly wired and grounded power sources.

To help protect the product from sudden, transient increases and decreases in electrical power, use a surge suppressor, line conditioner, or uninterruptible power supply (UPS).

Do not connect or disconnect this product during an electrical storm.

Input Supply

This SLB branch office manager may have more than one power supply source. Disconnect all power supply sources before servicing to avoid electric shock.

Check nameplate ratings to assure there is no overloading of supply circuits that could affect over current protection and supply wiring.

Grounding

Maintain reliable grounding of this product.

Pay particular attention to supply connections when connecting to power strips, rather than directly to the branch circuit.

Install DC-rated equipment only under the following conditions:

−Connect the equipment to a DC supply source that is electrically isolated from the AC source and reliably connected to ground, or connect it to a DC (SELV) source.

SLB™ Branch Office Manager User Guide 267