Lantronix 900-510 manual Basic Parameters, Requirements

6: Basic Parameters

This chapter explains how to set the following basic configuration settings for the SLB branch office manager using the SLB web interface or the CLI:

Network parameters that determine how the SLB interacts with the attached network

Firewall and routing

Date and time

Note: If you entered some of these settings using a Quick Setup procedure, you may update them here.

Requirements

Eth1

Eth2

If you assign a different IP address from the current one, it must be within a valid range, unique to your network, and with the same subnet mask as your workstation.

To configure the unit, you need the following information: IP address: ________. ________ . ________ .________

Subnet mask: ________. ________ . ________ .________

IP address (optional): ________. ________ . ________ .________

Subnet mask (optional): ________. ________ . ________ .________

Gateway: ________. ________ . ________ .________

DNS: ________. ________ . ________ .________

SLB™ Branch Office Manager User Guide 47