Lantronix 900-510 manual Dynamic Routing, Static Routing, To configure routing settings

6: Basic Parameters

Routing

The SLB branch office manager allows you to define static routes and, for networks using Routing Information Protocol (RIP)-capable routes, to enable the RIP protocol to configure the routes dynamically.

To configure routing settings:

1. Click the Network tab and select the Routing option. The following page displays:

2.Enter the following:

Dynamic Routing

Enable RIP	Select to enable Dynamic Routing Information Protocol
	(RIP) to assign routes automatically. Disabled by default.
RIP Version	Select the RIP version. The default is 2.

Static Routing

Enable Static Routing

Select to assign the routes manually. The system administrator usually provides the routes. Disabled by default.

To add a static route, enter the IP Address, Subnet Mask, and Gateway for the route and click the Add/Edit Route button. The route displays in the Static Routes table. You can add up to 64 static routes.

To edit a static route, select the radio button to the right of the route, change the IP Address, Subnet Mask, and Gateway fields as desired, and click the Add/Edit Route button.

To delete a static route, select the radio button to the right of the route and click the Delete Route button.

3. Click the Apply button.

SLB™ Branch Office Manager User Guide 58