Lantronix 900-510 manual Command Reference, Introduction to Commands

14: Command Reference

After an introduction to using commands, this chapter lists and describes all of the commands available on the SLB command line interface accessed through Telnet, SSH, or a serial connection. The commands are in alphabetical order by category.

Introduction to Commands

Following is some information about command syntax, command line help, and tips for using commands.

Command Syntax

Commands have the following format:

<action> <category> <parameter(s)>

where

<action> is set, show, connect, admin, diag, pccard, or logout.

<category> is a group of related parameters whose settings you want to configure or view. Examples are ntp, deviceport, and network.

<parameter(s)> is one or more name-value pairs in one of the following formats:

	User must specify one of the values (aa or bb)
<parameter name> <aa bb>	separated by a vertical line ( ). The values
	are in all lowercase and must be entered
	exactly as shown. Bold indicates a default
	value.
<parameter name> <Value>	User must specify an appropriate value, for
	example, an IP address. The parameter
	values are in mixed case. Square brackets [ ]
	indicate optional parameters.

SLB™ Branch Office Manager User Guide 212