11: User Authentication

LDAP allows SLB users to authenticate using a wide variety of LDAP servers, such as OpenLDAP and Microsoft Active Directory. The LDAP implementation supports LDAP servers that do not allow anonymous queries.

Users who are authenticated through LDAP are granted device port access through the port permissions on this page.

All LDAP users are members of a group that has predefined user rights associated with it. You can add additional user rights that are not defined by the group.

To configure the SLB branch office manager to use LDAP to authenticate users:

1. Click the User Authentication tab and select LDAP. The following page displays.

2. Enter the following:

Enable LDAP

Displays selected if you enabled this method on the first User

 

Authentication page. If you want to set up this authentication

 

method but not enable it immediately, clear the checkbox.

 

 

Server

The IP address or host name of the LDAP server.

 

 

Port

Number of the TCP port on the LDAP server to which the SLB

 

branch office manager talks. The default is 389.

 

 

SLB™ Branch Office Manager User Guide

150

Page 150
Image 150
Lantronix 900-510 manual Enable Ldap, Server