3: Installation

see D: Adapters and Pinouts and our web site at www.lantronix.com/support and click Cable/Adapter Lookup on the Support menu.

To connect a terminal:

1.Attach the Lantronix adapter to your terminal (use PN 200.2066A adapter) or your PC's serial port (use PN 200.2070A adapter).

2.Connect the Cat 5 cable to the adapter, and connect the other end to the SLB console port.

3.Turn on the terminal or start your computer’s communication program (e.g., HyperTerminal for Windows).

4.Once the SLB branch office manager is running, press Enter to establish connection. You should see the model name and a login prompt on your terminal. You are connected.

Connecting to a Power Source

The SLB branch office manager consumes less than 20W of electrical power.

The SLB device has a universal auto-switching AC power supply. The power supply accepts AC input voltage between 100 and 240 VAC with a frequency of 50 or 60 Hz. Rear-mounted IEC-type AC power connector(s) are provided for universal AC power input (see page 22 for included power cords).

Figure 4-2. AC Power Input

Connecting Devices to Power Outlets

To avoid the possibility of noise due to arcing:

1.Keep the device’s on/off switch in the off position until after it is plugged into the outlet, or log in to the unit and turn the outlets off before connecting the devices.

2.Connect devices to the outlets.

There are four power outlet status LEDs next to outlet number 1. The status LED for outlet 1 is at the top. If the LED for an outlet is dark the outlet is turned off; if it is lit the outlet is turned on.

Figure 3-2. Power Outlets

SLB™ Branch Office Manager User Guide

26

Page 26
Image 26
Lantronix 900-510 manual Connecting to a Power Source, Connecting Devices to Power Outlets, To connect a terminal