12: Maintenance and Operation

To enable or disable iGoogle Gadget web content:

admin web gadget <enabledisable>

To configure the timeout for web sessions:

admin web timeout <disable5-120>

Timeouts are measured in minutes.

To terminate a web session:

admin web terminate <web session id>

To view current timeout and all active web sessions:

admin web show

To list current hardware and firmware information:

admin version

To update SLB firmware to a new revision:

Note: The firmware file should be accessible via the settings displayed by admin ftp show. The SLB branch office manager automatically reboots after successful update.

admin firmware update <ftptftpsftp> file <Firmware File> key <Checksum Key>

To set the boot bank to be used at the next SLB reboot:

admin firmware bootbank <12>

Applies to dual-boot SLB devices only.

To list the current firmware revision:

admin firmware show [viewlog <enabledisable>]

Lists the current firmware revision, the boot bank status (for dual-boot SLB branch office managers), and optionally displays the log containing details about firmware updates.

To lock or unlock the LCD keypad:

Note: If the keypad is locked, users can scroll through settings but not change them.

admin keypad <lockunlock>

To change the Restore Factory Defaults password used at the LCD to return the SLB branch office manager to the factory settings:

admin keypad password <Password>

Must be 6 digits.

SLB™ Branch Office Manager User Guide

188

Page 188
Image 188
Lantronix 900-510 manual To enable or disable iGoogle Gadget web content, To configure the timeout for web sessions