Lantronix 900-510 Select or clear the checkboxes for the following rights, Clear Port Buffers

	11: User Authentication
Custom Menu	If custom menus have been created you can assign a
	default custom menu to NIS users.
Escape Sequence	A single character or a two-character sequence that causes
	the SLB branch office manager to leave direct (interactive)
	mode. (To leave listen mode, press any key.)
	A suggested value is Esc+A (escape key, then uppercase
	"A" performed quickly but not simultaneously). You would
	specify this value as \x1bA, which is hexadecimal (\x)
	character 27 (1B) followed by an A.
	This setting allows the user to terminate the connect
	direct command on the command line interface when the
	endpoint of the command is deviceport, tcp, or udp.
Break	A series of 1-10 characters users can enter on the command
Sequence	line interface to send a break signal to the external device. A
	suggested value is Esc+B (escape key, then uppercase “B”
	performed quickly but not simultaneously). You would specify
	this value as \x1bB, which is hexadecimal (\x) character 27
	(1B) followed by a B.
Data Ports	The ports users are able to monitor and interact with using
	the connect direct command. U and L denote the PC
	Card upper and lower slots.
Listen Ports	The ports users are able to monitor using the connect
	listen command.
Clear Port Buffers	The ports whose port buffer users may clear using the set
	locallog clear command.
Access Outlets	The outlets the user may monitor and configure.

3. In the User Rights section, select the user group to which NIS users will belong:

Group

Select the group to which the NIS users will belong:

Default Users: This group has only the most basic rights. You can specify additional rights for the individual user .

Power Users: This group has the same rights as Default Users plus Networking, Date/Time, Reboot & Shutdown, and Diagnostics & Reports.

Administrators: This group has all possible rights.

4. Select or clear the checkboxes for the following rights:

Full Administrative	Right to add, update, and delete all editable fields.
Networking	Right to enter Network settings.
Services	Right to enable and disable system logging, SSH and Telnet
	logins, SNMP, and SMTP.
Date/Time	Right to set the date and time.

SLB™ Branch Office Manager User Guide 147