8: Device Ports

Permissions

There are three types of permissions:

Direct (or data) mode: The user can interact with and monitor the device port (connect direct command).

Listen mode: The user can only monitor the device port (connect listen command).

Clear mode: The user can clear the contents of the device port buffer (set locallog <port> clear buffer command).

The administrator and users with local user rights may assign individual port permissions to local users. The administrator and users with remote authentication rights assign port access to users authenticated by NIS, RADIUS, LDAP, Kerberos and TACACS+.

Device Status

The Device Status page displays the status of the SLB branch office manager's ports, PC card slots and power outlets.

1.Click the Devices tab and select the Device Status option. The following page displays:

Global Port Settings

On the Device Ports page, you can set up the numbering of Telnet, SSH, and TCP ports, view a summary of current port modes, establish the maximum number of direct connections for each device port, and select individual ports to configure.

1.Click the Devices tab and select the Device Status option. The following page displays:

SLB™ Branch Office Manager User Guide

81

Page 81
Image 81
Lantronix 900-510 manual Permissions, Device Status, Global Port Settings