13: Application Examples

Local Serial Connection to Network Device via Telnet

This example shows a terminal device connected to an SLB device port, and a Sun server connected over the network to the SLB branch office manager. When a connection is established between the device port and an outbound Telnet session, users can access the Sun server as though they were directly connected to it. (See 10: Connections for more information).

Serial Cable to

Device Port 2

Internet

Sun UNIX Server

In this example, the sysadmin would:

1. Display the current settings for device port 2:

[SLB]> show deviceport port 2

___Current Device Port

Settings________________________________________________

Number: 2 Name: Port-2

Modem Settings-------------------

Data Settings----------

IP Settings---------

Modem State: disabled

Baud Rate: 9600

Telnet: disabled

Modem Mode: text

Data Bits: 8

Telnet Port: 2002

Timeout Logins: disabled

Stop Bits: 1

SSH: disabled

Local IP: negotiate

Parity: none

SSH Port: 3002

Remote IP: negotiate

Flow Control: xon/xoff IP: <none>

Authentication: PAP

Logins: disabled

 

CHAP Host: <none>

Break Sequence: \x1bB

 

CHAP Secret: <none>

Check DSR: disabled

 

NAT: disabled

Close DSR: disabled

 

Dial-out Login: <none>

 

 

Dial-out Password: <none>

 

 

Dial-out Number: <none>

 

 

Dial-back Number: usernumber

 

 

Initialization Script: <none>

 

 

Logging Settings--------------------------------------------------------------

 

-

PC Card Logging: disabled

Local Logging: disabled

Email Logging: disabled

Log to: upper slot

 

SLB™ Branch Office Manager User Guide

210

Page 210
Image 210
Lantronix 900-510 manual Local Serial Connection to Network Device via Telnet