Lantronix 900-510 manual Telnet/SSH to a Remote Device

13: Application Examples

Telnet/SSH to a Remote Device

The following figure shows a Sun server connected to port 2 of the SLB device.

Figure 13-2. Remote User Connected to a SUN Server via the SLB Device

Sun Server

Remote User

Serial Cable to Device Port 2

Internet

SLB Branch Office Manager

In this example, the sysadmin would:

1. Display the current settings for device port 2:

[SLB]> show deviceport port 2

___Current Device Port

Settings________________________________________________

Number: 2 Name: Port-2

Modem Settings-------------------		Data Settings----------	IP Settings---------
Modem State: disabled		Baud Rate: 9600	Telnet: disabled
Modem Mode: text		Data Bits: 8	Telnet Port: 2002
Timeout Logins: disabled		Stop Bits: 1	SSH: disabled
Local IP: negotiate		Parity: none	SSH Port: 3002
Remote IP: negotiate		Flow Control: xon/xoff IP: <none>
Authentication: PAP		Logins: disabled
CHAP Host: <none>		Break Sequence: \x1bB
CHAP Secret: <none>		Check DSR: disabled
NAT: disabled		Close DSR: disabled
Dial-out Login: <none>
Dial-out Password: <none>
Dial-out Number: <none>
Dial-back Number: usernumber
Initialization Script: <none>
Logging Settings--------------------------------------------------------------
-		PC Card Logging: disabled
Local Logging: disabled
Email Logging: disabled		Log to: upper slot
Byte Threshold: 100		Max number of files: 10
Email Delay: 60	seconds	Max size of files: 2048
Restart Delay: 60	seconds
Email To: <none>

Email Subject: Port %d Logging

Email String: <none>

NFS File Logging: disabled

Directory to log to: <none>

Max number of files: 10

Max size of files: 2048

2. Change the baud to 57600 and disable flow control:

[SLB]> set deviceport port 2 baud 57600 flowcontrol none Device Port settings successfully updated.

SLB™ Branch Office Manager User Guide 207