Lantronix 900-510 manual Local and Remote Users, To enable local and/or remote users

11: User Authentication

Local and Remote Users

The system administrator can configure the SLB device to use local accounts and remote accounts to authenticate users.

1.Click the User Authentication tab and select the Local/Remote Users option. The following page displays.

The top of the page has entry fields for enabling local and remote users and for setting password requirements. The bottom of the page displays a table listing and describing all local and remote users.

To enable local and/or remote users:

1. Enter the following:

Enable Local	Select to enable all local users except sysadmin. The
Users	sysadmin is always available regardless of how you set the
	check box. Enabled by default.
Authenticate only	Select the check box to authenticate users listed in the
users who are in	Remote Users list in the lower part of the page. Disabled by
the remote users	default.
list

2. Click the Apply button.

To set password requirements for local users:

SLB™ Branch Office Manager User Guide 137