Lantronix 900-510 manual Specifying, Date/Time, Sysadmin, Password

	4: Quick Setup
IP Address (if	An IP address that will be unique and valid on your network and in the
specifying)	same subnet as your PC. There is no default.
	If you selected DHCP or BOOTP, this prompt does not display.
	Enter all IP addresses in dot-quad notation. Do not use leading zeros
	in the fields for dot-quad numbers less than 100. For example, if your
	IP address is 172.19.201.28, do not enter 028 for the last segment.
	Note: Configurations with the same IP subnet on multiple interfaces
	(Ethernet or PPP) are not currently supported.
Subnet Mask	The subnet mask specifies the network segment on which the branch
	office manager resides. There is no default. If you selected DHCP or
	BOOTP, this prompt does not display.
Default Gateway	IP address of the router for this network. There is no default.
Hostname	The default host name is slbXXXX, where XXXX is the last 4
	characters of the hardware address of Ethernet Port 1. There is a 64-
	character limit (contiguous characters, no spaces).
	Note: The host name becomes the prompt in the command line
	interface.
Domain	If desired, specify a domain name (for example,
	support.lantronix.com). The domain name is used for host name
	resolution within the SLB branch office manager. For example, if abcd
	is specified for the SMTP server, and mydomain.com is specified for
	the domain, if abcd cannot be resolved, the SLB device attempts to
	resolve abcd.mydomain.com for the SMTP server.
Time Zone	If the time zone displayed is incorrect, enter the correct time zone and
	press Enter. If the entry is not a valid time zone, the system guides
	you through selecting a time zone. A list of valid regions and countries
	displays. At the prompts, enter the correct region and country.
Date/Time	If the date and time displayed are correct, type n and continue. If the
	date and time are incorrect, type y and enter the correct date and time
	in the formats shown at the prompts.
Sysadmin	Enter a new sysadmin password.
password

After you complete the Quick Setup script, the changes take effect immediately.

SLB™ Branch Office Manager User Guide 38