Lantronix 900-510 manual Connection Commands, To view, update, or disconnect a current connection

10: Connections

To view, update, or disconnect a current connection:

The bottom of the Connections web page displays current connections.

4.To view details about a connection, hold the mouse over the arrow in the Flow column.

5.To disconnect (delete) a connection, select the connection in the Select column and click the Terminate button.

6.To reestablish the connection, create the connection again in the top part of the page.

7.To view information about Web connections, click the here link in the text above the table. The Firmware & Configurations - Web Sessions page displays.

Connection Commands

These commands for configuring connections correspond to the web page entries described above.

To connect to a device port to monitor and/or interact with it, or to establish an outbound network connection:

connect direct <endpoint> Endpoint is one of:

deviceport <Port # or Name>

ssh <IP Address or Name> [port <TCP Port>] [<SSH flags>]

where <SSH flags> is one or more of: user <Login Name>

version <12>

command <Command to Execute> tcp <IP Address> [port <TCP Port>]

telnet <IP Address or Name> [port <TCP Port>]

udp <IP Address> [port <UDP Port>] hostlist <Host List>

To configure initial timeout for outgoing connections:

Note: This is not a TCP timeout.

connect global outgoingtimeout <disable1-9999 seconds>

SLB™ Branch Office Manager User Guide 131