Lantronix 900-510 manual There is no default

12: Maintenance and Operation

2. Enter the following:

Event Trigger	From the drop-down list, select the type of incident that triggers an
	event. Currently, the options are:
	Receive Trap
	Temperature Over/Under Limit: For Sensorsoft devices.
	Humidity Over/Under Limit: For Sensorsoft devices.
Action	From the drop-down list, select the action taken because of the
	trigger. For example, the action can be writing an entry into the
	syslog with details of the event or sending the trap(s) to the
	Ethernet or modem connection.
Ethernet	For actions that require an Ethernet connection (for example,
	Forward All Traps to Ethernet), select the Ethernet port to use.
Modem	For actions that require a modem connection (for example,
Connection on	Forward All Traps to a Modem Connection, select which device
	port or PC Card slot with a modem connection to use.
NMS/Host to	For actions that forward a trap, enter the IP address of the
forward trap to	computer to forward the trap to. The computer does not have to
	be an SNMP NMS; it just has to be capable of receiving SNMP
	traps.
SNMP Community	Forwarded traps are sent with this SNMP community value
	There is no default.

SLB™ Branch Office Manager User Guide 203