Lantronix 900-510 manual Logging Commands, PC Card Logging, Syslog Logging

		8: Device Ports
PC Card Logging
	PC Card Logging	Select to enable PC Card logging. A PC Card Compact
		Flash must be loaded into one of the PC Card slots on the
		front of the SLB branch office manager and properly
		mounted ((see PC Card Logging on page 99). Disabled by
		default.
	Log To	If port logging is to a PC Card, select the slot (Upper or
		Lower) in which the PC Card has been inserted. Upper is
		the default.
	Max Number of	The maximum number of files to create to contain log data
	Files	to the port. These files keep a history of the data received
		from the port. Once this limit is exceeded, the oldest file is
		overwritten. The default is 10.
	Max Size of Files	The maximum allowable file size in bytes. The default is
		2048 bytes. Once the maximum size of a file is reached,
		the SLB device begins generating a new file. The default is
		2048 bytes.
Syslog Logging

Syslog Logging

Select to enable system logging.

Note: The logging level for the device ports log must be set to Info to view Syslog entries for Device Port logging on the Services page.

Note: To apply the settings to additional device ports, in the Apply settings to Device Ports field, enter the additional ports, (e.g., 1-3, 5, 6)

3.To apply settings to other device ports in addition to the currently selected port, select the Apply settings to Device Ports and enter port numbers separated by commas. Indicate a range of port numbers with a hyphen (e.g., 2, 5, 7-10), and separate ranges with commas.

4.To save, click the Apply button.

Logging Commands

The following CLI commands correspond to the web page entries described above.

To configure logging settings for one or more device ports:

Example: set deviceport port 2-5,6,12,15-16 baud 2400 locallogging enable

Note: Local logging must be enabled for a device port for the locallog commands to be executed. To use the set locallog clear command, the user must have permission to clear port buffers (see 11: User Authentication).

set deviceport port <Device Port List or Name> <one or more deviceport parameters>

Parameters:

emaildelay <Email Delay>

emaillogging <disablebytecntcharstr>

SLB™ Branch Office Manager User Guide 103