Lantronix 900-510 manual Modem Settings Text Mode

		8: Device Ports
	Initialization Script	Commands sent to configure the modem may have up to
		100 characters. Consult your modem’s documentation for
		recommended initialization options. If you do not specify
		an initialization script, the SLB device uses a default
		initialization string of AT S7=45 SO=0 L1 V1 X4 &D2
		&c1 E1 Q0.
		Note: We recommend that the modem initialization script
		always be preceded with AT and include E1 V1 x4 Q0 so
		that the SLB branch office manager may properly control
		the modem.
	Modem Timeout	Timeout for all modem connections. Select Yes (default)
		for the SLB device to terminate the connection if no traffic
		is received during the configured idle time. Enter a value of
		from 1 to 9999 seconds. The default is 30 seconds.
	Caller ID Logging	Select to enable the SLB branch office manager to log
		caller IDs on incoming calls. Disabled by default.
		Note: For the Caller ID AT command, refer to the modem
		user guide.
	Modem Command	Modem AT command used to initiate caller ID logging by
		the modem.
		Note: For the AT command, refer to the modem user
		guide.
Modem Settings: Text Mode
	Timeout	If you selected Text mode, you can enable logins to time
	Logins	out after the connection is inactive for a specified number
		of minutes. The default is No. This setting is only
		applicable for text mode connections. PPP mode
		connections stay connected until either side drops the
		connection. Disabled by default.
	Dial Back	Users with dial-back access can dial into the SLB branch
	Number	office manager and enter their login and password. Once
		the SLB device authenticates them, the modem hangs up
		and dials them back.
		Select the phone number the modem dials back on a fixed
		number or a number associated with their login. If you
		select Fixed Number, enter the number (in the format
		2123456789).
	Dial-in Host List	From the drop-down list, select the desired host list. The
		host list is a prioritized list of SSH, Telnet, and TCP hosts
		that are available for establishing outgoing modem
		connections or for connect direct at the CLI. The hosts in
		the list are cycled through until the SLB branch office
		manager successfully connects to one.
		To establish and configure host lists, click the Host Lists
		link.

SLB™ Branch Office Manager User Guide 89