Lantronix 900-510 manual Device Port Sensorsoft Device, SLP Commands

		8: Device Ports
	Infeed Status	Click the link to view the status of the data the SLP power
		manager is receiving.
	System Info	Click the link to see system information pertaining to the SLP
		device.
SLP Commands
	Restart SLP	To restart the SLP power manager, select the checkbox.
	Control Outlet	For Tower A or Tower B, select All Outlets or Single Outlet
		and the number of the outlet to be controlled (1-8 for the
		SLP8 power manager or 1-16 for the SLP16 power manager)
		and select the command for the outlet (No Action, Power On,
		Power Off, Cycle Power). No Action is the default.

2. Click the Apply button.

Device Port – Sensorsoft Device

Devices made by Sensorsoft are used to monitor environmental conditions.

1.In the Connected to field above the IP Settings section of the Device Ports – Settings page, select Sensorsoft.

2.Click the Device Commands link. The following page displays:

3. Select a port and enter or view the following information:

Device Port (view	Number of the SLB port.
only)
Device Name (view	Name of the SLB port.
only)
Temp (°C)	Current temperature (degrees Celsius) on the device the
	sensor is monitoring.
Low Temp	Enter the temperature (degrees Celsius) permitted on the
	monitored device below which the SLB branch office
	manager sends a trap.
High Temp	Enter the temperature (degrees Celsius) permitted on the
	monitored device above which the SLB device sends a trap.

SLB™ Branch Office Manager User Guide 93