8: Device Ports

2. Enter the following:

Switching Delay

Number of milliseconds the SLB branch office manager between

 

subsequent switching. The range is 1000-2500 msec. The

 

default is 2000 msec (2 sec).

 

 

Over Current

If SNMP traps are enabled (see 7:Services), a trap (alarm) is

Alarm

sent if the total current for all outlets exceeds a threshold. Enter

 

the number of amps (measured in tenths of an amp) above

 

which the SLB device sends a trap. The maximum is 180.

 

Note: If the alarm goes off, a warning message displays on the

 

CLI.

 

 

Current Level for

Displays the total load carried by the outlets.

all Outlets

 

 

 

3. View or enter the following information for each outlet:

Outlet

Displays the number of the outlet being configured.

Status

Displays the current state of the outlet.

Name

User-configurable name identifying the outlet.

Description

User-configurable text describing the outlet.

(optional)

 

Power State

Select whether the power should be on or off. Default is Off.

Wakeup Mode

Select whether, after a reboot, the power state for the outlet

SLB™ Branch Office Manager User Guide

107

Page 107
Image 107
Lantronix 900-510 manual View or enter the following information for each outlet