Lantronix 900-510 manual Connect direct

14: Command Reference

charxfer <toendpointfromendpoint> date <MMDDYYhhmm[ss]> deviceport <Device Port # or Name> exclusive <enabledisable>

ssh <IP Address or Name> [port <TCP Port>][<SSH flags>] where <SSH flags> is one or more of:

user <Login Name> version <12>

command <Command to Execute> tcp <IP Address> [port <TCP Port>]

telnet <IP Address or Name> [port <TCP Port>] trigger <nowdatetimechars>

If the trigger is datetime (establish connection at a specified date/time), enter the date parameter. If the trigger is chars (establish connection on receipt of a specified number or characters or a character sequence), enter the charxfer parameter and either the charcount or the charseq parameter.

udp <IP Address> [port <UDP Port>]

Description

Connects a device port to another device port or an outbound network connection (data flows in both directions).

connect direct

Syntax

connect direct <endpoint>

Parameters

Endpoint is one of:

deviceport <Device Port # or Name>

ssh <IP Address or Name> [port <TCP Port>][<SSH flags>] where <SSH flags> is one or more of:

user <Login Name> version <12>

command <Command to Execute> tcp <IP Address> [port <TCP Port>]

telnet <IP Address or Name> [port <TCP Port>] udp <IP Address> [port <UDP Port>

Description

Connects to a device port to monitor and/or interact with it, or establishes an outbound network connection.

SLB™ Branch Office Manager User Guide 233