Lantronix 900-510 manual NFS and SMB/CIFS Commands, To mount a remote NFS share

7: Services

Network Interfaces	Select the network ports from which the share can
	be seen. The default is for the share to be visible
	on both network ports.
CIFS User	Only one user special username (cifsuser) can
Password/Retype	access the CIFS share. Enter the CIFS user
Password	password in both password fields. The default
	user password is CIFSPASS.
	More than one user can access the share with the
	cifsuser user name and password at the same
	time.
Workgroup	The Windows workgroup to which the SLB branch
	office manager belongs. Every PC exporting a
	CIFS share must belong to a workgroup. Can
	have up to 15 characters.

4. To save, click the Apply button.

NFS and SMB/CIFS Commands

The following CLI commands correspond to the web page entries described above.

To mount a remote NFS share:

set nfs mount <one or more parameters>

Parameters:

locdir <Directory> mount <enabledisable> remdir <Remote NFS Directory> rw <enabledisable>

Enables read/write access to remote directory.

Note: The remdir and locdir parameters are required, but if you specified them previously, you do not need to provide them again.

To unmount a remote NFS share:

set nfs unmount <123>

To view NFS share settings:

show nfs

SLB™ Branch Office Manager User Guide 71