Lantronix 900-510 manual Device Port Commands, To configure a single port or a group of ports

	8: Device Ports
Humidity (%)	Current relative humidity on the device the sensor is
	monitoring.
Low Humidity	Enter the relative humidity permitted on the device the
	sensor is monitoring below which the sensor sends a trap to
	the SLB branch office manager.
High Humidity	Enter the highest relative acceptable humidity permitted on
	the device above which the sensor sends a trap to the SLB
	device.
Traps	Select to indicate the SLB branch office manager should
	send a trap or configured Event Alert when the sensor
	detects an out-of-range configured threshold.

4.Click the Apply button.

5.To view the status detected by the Sensorsoft, click the Sensorsoft Status link to the right of the table.

Device Port Commands

The following CLI commands correspond to the web page entries described above.

To configure a single port or a group of ports:

Example: set deviceport port 2-5,6,12,15-16 baud 2400

set deviceport port <Device Port List or Name> <one or more device port parameters>

Parameters:

auth <papchap> banner <Banner Text> baud <300-115200> breakseq <1-10 Chars>

calleridcmd <Modem Command String> calleridlogging <enabledisable> chaphost <CHAP Host or User Name> chapsecret <CHAP Secret or User Password>

The user defines the secret.

checkdsr <enabledisable> closedsr <enabledisable> databits <78>

device <noneslp8slp16> dialinlist <Host List for Dial-in> dialoutnumber <Phone Number> dialoutlogin <User Login>

SLB™ Branch Office Manager User Guide 94