Lantronix 900-510 manual Radius Commands, Reboot

	11: User Authentication
Reboot &	Right to use the CLI or shut down the SLB branch office
Shutdown	manager and then reboot it.
Firmware &	Right to upgrade the firmware on the unit and save or restore
Configuration	a configuration (all settings). Selecting this option
	automatically selects Reboot & Shutdown.
Diagnostics &	Right to obtain diagnostic information and reports about the
Reports	unit.
Web Access	Right to access Web Manager.
Device Ports	Right to enter device port settings.
PC Card	Right to enter modem settings for PC cards.
Power Outlets	Right to configure power outlets.

5. Click the Apply button.

Note: You must reboot the unit before your changes will take effect.

RADIUS Commands

These commands for the command line interface correspond to the web page entries described above.

To configure the SLB branch office manager to use RADIUS to authenticate users who log in via the Web, SSH, Telnet, or the console port:

set radius <one or more parameters>

Parameters:

accessoutlets <Outlet List> breakseq <1-10 Chars> clearports <Port List> dataports <Port List> escapeseq <1-10 Chars> listenports <Port List> state <enabledisable>

To identify the RADIUS server(s), the text secret, and the number of the TCP port on the RADIUS server:

set radius server <12> host <IP Address or Hostname> secret <Secret> [port <TCP Port>]

The default port is 1812.

To set the number of seconds after which the connection attempt times out:

set radius timeout <disable1-30>

May be 1-30 seconds.

SLB™ Branch Office Manager User Guide 157