14: Command Reference

slp outletcontrol state <onoffcyclepower> [outlet <Outlet #>][tower <AB>]

Outlet # is 1-8 for SLP8 power manager and 1-16 for SLP16 power manager. The outletcontrol parameters control individual outlets.

slp outletstate [outlet <Outlet #>]

The outletstate parameter shows the state of all outlets or a single outlet.

slp envmon

Displays the environmental status (e.g., temperature and humidity) of the SLP power manager.

slp infeedstatus

Displays the infeed status and load of the SLP power manager.

slp system

Provides system information for the SLP power manager.

sensorsoft lowtemp <Low Temperature in C.> Sets the lowest temperature permitted for the port.

sensorsoft hightemp <High Temperature in C.> Sets the hightest temperature permitted for the port.

sensorsoft lowhumidity <Low Humidity %>

Sets the lowest humidity pemitted for the port.

sensorsoft highhumidity <High Humidity %>

Sets the lowest humidity permitted for the port.

sensorsoft traps <enabledisable>

Enables or disables traps when specified conditions are met.

sensorsoft status Displays the status of the port.

Description

Sends commands to (or control) a device connected to an SLB device port over the serial port.

Note: Currently the only devices supported for this type of interaction are the SLP and Sensorsoft devices.

Device Port Commands

set deviceport port

Syntax

set deviceport port <Device Port List or Name> <one or more device port parameters>

Example: set deviceport port 2-5,6,12,15-16 baud 2400

Parameters

auth <papchap> banner <Banner Text> baud <300-115200> breakseq <1-10 Chars>

SLB™ Branch Office Manager User Guide

239

Page 239
Image 239
Lantronix 900-510 manual Device Port Commands, Set deviceport port