Lantronix 900-510 manual Command Syntax, Commands have the following format

5: Web and Command Line Interfaces

Command Syntax

Commands have the following format:

<action> <category> <parameter(s)>

where

<action> is set, show, connect, admin, diag, pccard, or logout.

<category> is a group of related parameters whose settings you want to configure or view. Examples are ntp, deviceport, and network.

<parameter(s)> is one or more name-value pairs in one of the following formats:

<parameter name> <aabb> User must specify one of the values (aa or bb) separated by a vertical line ( ). The values are in all lowercase and must be entered exactly as shown. Bold indicates a default value.

<parameter name> <Value> User must specify an appropriate value, for example, an IP address. The parameter values are in mixed case.

	Square brackets [ ] indicate optional
	parameters.
	Table 5-1. Actions and Category Options
Action	Category
set	network ipfilter routing datetime ntp services
	nfs cifs menu hostlist auth localusers
	remoteusers ldap radius kerberos tacacs+
	consoleport deviceport nis slcnetwork command
	sshkey password history cli locallog power
show	network ipfilter routing datetime ntp services
	nfs cifs menu hostlist auth localusers nis
	ldap radius kerberos tacacs+ consoleport
	deviceport locallog sysstatus syslog auditlog
	portstatus sysconfig portcounters connections
	slcnetwork sshkey history cli user remoteusers
	power
connect	direct listen bidirection unidirection terminate
diag	ping loopback traceroute arp lookup netstat
	perfstat sendpacket nettrace internals
pccard	storage modem
admin	reboot shutdown ftp config firmware version
	banner keypad quicksetup web events lcd
logout	Terminates CLI session.

SLB™ Branch Office Manager User Guide 44