Lantronix 900-510 manual Viewing IP Filters

6: Basic Parameters

To view all network settings:

show network all

To view Ethernet port settings and counters:

show network port <12>

To view DNS settings:

show network dns

To view gateway settings:

show network gateway

To view the host name of the SLB device:

show network host

IP Filter

IP filters (also called a rule set) act as a firewall to allow or deny individual or a range of IP addresses, ports, and protocols. When a network connection is configured to use an IP filter, all network traffic through that connection is compared, in order, to the rules of that filter. Network traffic may be allowed to pass, it may be dropped (without notice), or it may be rejected (sends back an error packet) depending upon the rules of that filter rule set.

The administrator uses the Network – IP Filter page to view, add, edit, delete, and map IP filters,

Warning: IP filters configuration is a feature for advanced users. Adding and enabling IP filter sets incorrectly can disable your SLB branch office manager.

Viewing IP Filters

You can view a list of filters and a table showing how each filter is mapped to an interface.

To view a list of IP filters:

1. Click the Network tab and select the IP Filter option. The following page displays:

SLB™ Branch Office Manager User Guide 53