Lantronix 900-510 manual Network Commands, Show locallog, Set locallog clear, Set network

14: Command Reference

sysloglogging <enabledisable>

Description

Configures logging settings for one or more device ports.

Local logging must be enabled for a device port for the locallog commands to be executed. To use the set locallog clear command, the user must have permission to clear port buffers (see 11: User Authentication).

Example

set deviceport port 2-5,6,12,15-16 baud 2400 locallogging enable

show locallog

Syntax

show locallog <Device Port # or Name> [bytes <Bytes To Display>]

Description

Displays a specific number of bytes of data for a device port. 1K is the default.

set locallog clear

Syntax

set locallog clear <Device Port # or Name>

Description

Clears the local log for a device port.

The locallog commands can only be executed for a device port if local logging is enabled for the port. The set locallog clear command can only be executed if the user has permission to clear port buffers (see 11: User Authentication).

Network Commands

set network

Syntax

set network <parameters>

Parameters

interval <1-99999 Seconds> ipforwarding <enabledisable> probes <Number of Probes> startprobes <1-99999 Seconds>

Description

Sets TCP Keepalive and IP Forwarding network parameters.

SLB™ Branch Office Manager User Guide 249