Lantronix 900-510 manual Host List Commands, To delete a host list

8: Device Ports

Escape Sequence

The escape character used to get the attention of the SSH or Telnet client. It is optional, and if not specified, Telnet and SSH use their default escape character.

For Telnet, the escape character is either a single character or a two-character sequence consisting of '^' followed by one character. If the second character is '?', the DEL character is selected. Otherwise, the second character is converted to a control character and used as the escape character.

For SSH, the escape character is a single character.

3.You have the following options:

To add a host to the host list, click the right arrow. The host displays in the Hosts box.

To remove a host from the host list, select the host in the Hosts box and click the left arrow.

To give the host a higher precedence, select the host in the Hosts box and click the up arrow.

To give the host a lower precedence, select the host in the Hosts box and click the down arrow.

4.Click the Edit Host List button. After the process completes, a link back to the Device Ports – Settings page displays.

To delete a host list:

1.Select the host list in the Host Lists table.

2.Click the Delete Host List button. After the process completes, a link back to the Device Ports – Settings page displays.

Host List Commands

The following CLI commands correspond to the web page entries described above.

To configure a prioritized list of hosts to be used for modem dial-in connections:

set hostlist addedit <Host List Name> [<parameters>]

Parameters:

name <Host List Name> (edit only)

retrycount <1-10> Default is 3.

auth <enabledisable>

SLB™ Branch Office Manager User Guide 112