Lantronix 900-510 manual Rule Parameters, To add an IP filter, Ruleset Name, Example FILTER-2

6: Basic Parameters

To add an IP filter:

1. On the IP Filter page, click the Add Ruleset button. The following page displays:

2. Enter the following

Ruleset Name

Name that identifies a filter; may be composed of letters, numbers, and hyphens only. (The name cannot start with a hyphen.)

Example: FILTER-2

Rule Parameters

IP Address	Specify a single IP address to act as a filter.
	Example: 172.19.220.64 – this specific IP address only
Subnet Mask	Specify a subnet mask to act as a filter.
	Example: 255.255.0.0
Protocol	From the drop-down list, select the type of protocol through
	which the filter will operate. The default setting is All.

SLB™ Branch Office Manager User Guide 55