Dialogic® SS7G2x Signaling Server SGW Mode User Manual Issue 4
6.5.13CNRDC – Configuration Remote Data Centre Change
Synopsis
This command is used to change the configuration of a Remote Data Centre (RDC).
Syntax
CNRDC:RDC=,{[IPADDR=,][USER=,][PASSWORD=,][LABEL=,]};
Prerequisites
•The RDC is already initiated and blocked.
•If specified, the IP address is not already in use.
•Remote data operation must be allowed by the system.
Attributes
CONFIG
Examples
CNRDC:RDC=1,IPADDR=194.192.184.77,USER=JOHN,PASSWORD=BAZZA23;
6.5.14CNRDE – Configuration Remote Data Centre End
Synopsis
This command is used to end a Remote Data Centre (RDC).
Syntax
CNRDE:RDC=;
Prerequisites
•The RDC is already initiated.
•The RDC is blocked.
•The RDC is not attached to a continuous record or periodic report.
Attributes
CONFIG
Examples
CNRDE:RDC=1;
55
