Dialogic SS7G2X manual Cnpcc Configuration PCM Change, Cnpce Configuration PCM End

Dialogic® SS7G2x Signaling Server SGW Mode User Manual Issue 4

6.5.9CNPCC – Configuration PCM Change

Synopsis

This command allows changes to the configuration of a PCM.

Syntax

CNPCC:PCM=,{[PCMTYPE=,][SYNCPRI=,][FF=,][LC=,][IDLE=][BM=][BUILDOUT=,]};

Prerequisites

•The PCM has already been initiated.

•For a PCMTYPE of E1, the LC can be set to HDB3 and the FF can be set to G704, CRC4, CRC4C or CRC4G706.

•For a PCMTYPE of T1, the LC can be set to AMI or B8ZS and the FF can be set to SF, ESF or CRC6.

•An FF of CRC4G706 can only be set on a board type of SS7HDP.

•The BUILDOUT parameter can only have a value of 0 for E1 and a value of 1 for T1s on boards of a type other than SS7HDP.

Attributes

CONFIG

Examples

CNPCC:PCM=1-1,SYNCPRI=3;

6.5.10CNPCE – Configuration PCM End

Synopsis

This command ends the configuration of a PCM such that it is unavailable for voice or signaling.

Syntax

CNPCE:PCM=;

Prerequisites

•No timeslot on the PCM has been assigned to voice, signaling monitoring or cross connections.

•The board on which the PCM exists has been blocked.

Attributes

CONFIG

Examples

CNPCE:PCM=1-1;

53