Dialogic SS7G2X manual Cnmoi Configuration Monitor Initiate, Cnmoe Configuration Monitor End

Dialogic® SS7G2x Signaling Server SGW Mode User Manual Issue 4

6.5.5CNMOI – Configuration Monitor Initiate

Synopsis

This command initiates the monitoring of an object on the Signaling Gateway. An object is currently a C7LINK.

For signaling, the STS monitors information sent from the EQU of the signaling link and the RTS monitors information received by the signaling link.

Syntax

CNMOI:C7LINK=,STS=,RTS=;

Prerequisites

•If specified, the C7LINK has already been initiated and must have a TS and EQU.

•The PCM on which STS exists must have already been initiated and STS must be within the correct range for the PCM type (0 to 31 for E1 and 1 to 24 for T1 PCMs).

•The PCM on which RTS exists must have already been initiated and RTS must be within the correct range for the PCM type (0 to 31 for E1 and 1 to 24 for T1 PCMs).

•

•

•

STS is not already assigned elsewhere on the system for output. RTS is not already assigned elsewhere on the system for output. A signaling link can only be monitored once.

Attributes

CONFIG

Examples

CNMOI:C7LINK=1,STS=3-3-15,RTS=5-3-16;

6.5.6CNMOE – Configuration Monitor End

Synopsis

This command ends the monitoring of an object. An object is currently only an signaling link.

Syntax

CNMOE:C7LINK=;

Prerequisites

•The C7LINK is being monitored.

Attributes

CONFIG

Examples

CNMOE:C7LINK=1;

51