Dialogic SS7G2X Cntds Configuration Time and Date Set, Cntdp Configuration Time And Date Print

Chapter 6 Command Definitions

6.5.19CNTDS – Configuration Time and Date Set

Synopsis

This command is used to specify the date (DATE) and time (TIME) as used by the system. System time is used by the Signaling Gateway to indicate the time an alarm occurred or cleared and to provide timestamps for such things as measurements and data records.

See the CNTDP command to verify the time and date settings.

Syntax

CNTDS:{[DATE=,][TIME=,]};

Prerequisites

•The date cannot be changed if periodic reports or continuous records are configured.

Attributes

CONFIG

Examples

CNTDS:DATE=2001-10-03,TIME=18:32:21;

6.5.20CNTDP – Configuration Time And Date Print

Synopsis

This command is used to print the system date and time.

Syntax

CNTDP;

Prerequisites

None

Attributes

None

Examples

CNTDP;

Output Format

2001-10-03 09:04:02

EXECUTED

60