Niles Audio ZR-6 manual Screen Calibration, Custom Image Display, Finding The Software Version

SYSTEM SETTINGS

SETTING UP THE ZONE KEYPADS

SCREEN CALIBRATION

The touchscreen display should be calibrated after installation, and whenever it does not respond well to key presses.

1.Select Calibration in the Configuration Menu.

2.Press the fi rst Target

displayed. A stylus with minimum surface area such as a plastic ball point pen with tip retracted will provide best results.

3. Press the second target displayed.

CUSTOM IMAGE DISPLAY

This feature enables you to display an image on the touchscreen. In commercial installations, you can display a company logo or image. In residential installations, you can display a photo of the family, the kids, or anything else that you’d like. This procedure requires a computer running the ZR-6 Software Utility connected to the ZR-6. Make sure you have the latest version of the ZR-6 Software Utility on your laptop. It can be downloaded at nilesaudio.com.

1.Connect your laptop to the front serial port and fl ip this switch to Archive/Update.

2.Open the ZR-6 Software Utility and select the Assign Custom Image menu item

3.Select which TS-Pro you want the image on

4.Select the image fi le you want displayed

FINDING THE SOFTWARE VERSION

1.Press-and-hold the Niles key for 20 seconds.

2.The software version number of the TS-Pro will be displayed.

3.Press the Off key to exit.

KEYPAD CONFIGURATION

The TS-Pro Touchscreen features a confi guration menu that accesses advanced settings usually performed at the time of installation. To enter the touch screen confi guration mode:

1.Press and hold the Niles logo key for ten seconds. The setup menu will appear after three seconds and then the confi guration menu will appear.

2.Touch the menu item for the setting to be adjusted.

3.Press “Exit” to return to the previous screen.

IR ON/OFF

The IR sensor built into the touch screen can be deactivated to prevent IR control issues, such as when the touch screen is exposed to direct sunlight. The internal sensor should always be deactivated when an external sensor is connected.

1.Select “IR ON/ OFF” from the main confi guration menu. The IR confi guration screen will be displayed.

“Back” returns to the previous menu. “Exit”

returns to the Now Playing screen.

2.To change the setting of the IR sensor, touch the IR toggle button on the screen. The button status will change to show the current confi guration of the IR sensor.

SOURCE LEVEL ADJUSTMENT

Often, source devices will have different volume output levels. The TS-Pro includes an adjustment to match the volume levels of the connected source devices so when a source selection is changed, the volume level in the zone remains constant. This volume level adjustment is global and is performed only once for the entire system. To set the source levels:

1.Select “Source Level” from the main confi guration menu. The Source Level confi guration screen will be displayed.

“Back” returns to the previous menu. “Exit” returns to the main screen for the active source. The up and down arrows scroll through the available sources.

58 NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 305-238-4373