Niles Audio manual ZR-6MULTIZONE RECEIVER REAR PANEL CONTINUED, System Parts Guide

SYSTEM PARTS GUIDE

ZR-6 MULTIZONE RECEIVER REAR PANEL (CONTINUED)

27)ZONE FOUR, FIVE, AND SIX 12V TRIGGER OUTPUTS — Three 3.5 mm mini-jacks are used to provide a 12V DC trigger to automate the power turn-on and turn-off of zone-specifi c connected devices such as Niles Systems Integration Amplifi ers.

28)GLOBAL IR INPUT — A single 3.5 mm mini-jack is used to provide an input connection for IR commands from an external control system such as the Niles iC2™ Home Theater Automation System (FG01342).

29)HT (HOME THEATER) SYNC INPUT — A single 3.5 mm mini-jack is used to detect voltage from a connected home theater system to let the ZR-6 MultiZone Receiver know when the home theater is on.

30)RACK MOUNT EARS — Two metal rack-mount ears are included and can be attached for installing the ZR-6 MultiZone Receiver into a professional rack.

31)IEC POWER CABLE CONNECTOR — Two-pin connector for the removable power cord.

32)LOUDSPEAKER TERMINALS — A removable terminal is provided for each of the six zones. Accepts speaker wire up to 14 AWG.

33)ZONE FOUR, FIVE, AND SIX PREAMPLIFIER OUTPUTS — Three pairs of stereo RCA jacks are used to connect external power amplifi ers. Can be switched between fi xed or variable output.

34)SOURCE AUDIO INPUTS — Four pairs of stereo RCA jacks are used to connect stereo audio to Sources 3-6.

35)SOURCE 2 AUDIO INPUT/iPod CASCADE AUDIO OUTPUT — A pair of stereo RCA jacks are used to provide an

analog input for a Source 2 external device when an iPod is not being used with the system. With an iPod, these jacks become cascade audio outputs to route the iPod’s audio signal to a Slave ZR-6 MultiZone Receiver.

36)iPod CONNECTOR — A 30-pin connector is used to provide a connection for an iPod digital music player as Source 2.

8 NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 305-238-4373