Niles Audio ZR-6 manual Considerations, Ir Programming, Programming Source Device Ir Command Codes

IR PROGRAMMING

PROGRAMMING SOURCE DEVICE IR COMMAND CODES

Page 4	Source 5
Page 5	Source 6
Page 6	Library 1
Page 7	Library 2

Additional pages are supplied for building IR command sequences:

Page 8 Tuner

Page 9 Source 2 (iPod)

Page 10 Source 3

Page 11 Source 4

Page 12 Source 5

Page 13 Source 6

The command code memory cells appear in this order. (All codes are mapped to correspondingly named buttons on the R-8L remote). Please refer to the IR Mapping Chart to determine which codes are activated by button presses on the keypads.

Power ON

Power OFF

Play

Pause

Stop

Fast Forward

Rewind

Record

Next (> on MD Keypad)

Previous (< on MD Keypad)

Up

Down

Left

Right

OK (select) #1 #2 #3 #4 #5 #6

#7

#8

#9

#0

Enter

Channel Up

Channel Down

Last

Menu

Guide

Info

List

Exit

Red

Green

Yellow

Blue

Input

Replay

Disc

Page Up

Page Down

Live

Fav

Random

Group

The command list is looped so that pressing Previous with “Power ON” in the display moves to “Group”.

CONSIDERATIONS:

•All zones should be off before entering programming mode.

•It is not necessary to learn all devices, or all commands for any device.

•Pages for devices not named in the “Source Naming” confi guration will not appear when learning IR codes.

•Pressing the Program button at any time will move to the next memory page (source device, library or sequence). Any commands stored on that page will be saved before moving to the next page.

•Pressing the Previous and Next (or the + and -) buttons move through the options within a memory page.

•Pressing-and-holding the Program button at any time while in programming mode will exit programming mode. Any commands stored prior will be saved.

•The source device factory remote controls must be in working order and have fresh batteries in order to learn IR codes properly.

•The learning capacity for each memory page (source, or library) is approximately 42 to 75 commands, depending on the complexity of the commands being learned

•Certain device functions cannot be learned, including multi-frequency codes, some high frequency codes and other unusual formats. An “IR INVALID” message will appear on the display should one of these codes be encountered.

•For best results, avoid high levels of ambient light, such as natural sunlight or fl uorescent lighting.

•For future reference, it is recommended that the learned IR command information be recorded on the forms provided in the Appendix.

•TS-Pro will disable any buttons for which no IR command is present. They will appear grayed out on the screen.

NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 305-238-4373

41