
EN 55
Edit To Or From Another Video Recorder
You can use your unit as the source player or as the recording deck.
A When using your unit as the source player: |
| |
TV | Player | Your unit |
| AV mode |
|
|
| |
| (not provided) |
|
| Another recorder |
|
| Recorder |
|
B When using your unit as the recording deck: |
| |
TV | Recorder | Your unit |
| AV mode |
|
|
| |
| (not provided) |
|
| Another recorder |
|
Player
Slide the TV/VCR/DVD switch to the right.
A Make connections.
Connect the player’s
AWhen using your unit as the source player:
— connect its
deck.
BWhen using your unit as the recording deck:
— connect its
B Select the VHS deck.
On the unit
Press VCR/DVD repeatedly so that the VCR indicator lights up.
On the remote control
Press VCR so that the VCR indicator lights up.
C Set the input mode of recording deck.
With this unit, press AUX (number key “0”) and/or PR to select
●When using another recorder as the recording deck, refer to its instruction manual.
●When using the
D Set the edit mode.
See “PICTURE CONTROL” on page 63.
E Engage the Record Pause mode of the recording deck.
Locate the point where you start recording, then engage the Record Pause mode.
F Start the source player.
Engage the Play mode of the source player.
G Start the recording deck.
Engage the Record mode of the recording deck.
NOTES:
●All necessary cables can be obtained from your dealer.
●When you select “EDIT” to dub tapes in step D, be sure to select “AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”) after you finish dubbing the tapes.
●When you use this unit as the source player for editing, be sure to set “O.S.D.” to “OFF” before starting. ( pg. 63)