EN 11

D Perform Auto Set Up.

Press OK. The AUTO SET/T-V LINK display appears on the front display panel and/or on the TV screen.

On the front display panel

Press rt to select “AUTO” and press OK or e.

On the on-screen display Press rt to move the highlight bar (pointer) to “AUTO SET” and press OK or e.

While Auto Set Up is in progress, do NOT press any button on the unit or remote control until the front display panel shows either the display as illustrated in step E or “– –:– –” as illustrated on page 13.

If you are using the on-screen display, the AUTO SET

screen will appear. As Auto Set Up progresses, the “q” mark on the TV screen moves from left to right.

BeginningEnd

When you have connected the unit to a TV offering T-V Link via a fully-wired 21-pin SCART cable ( pg. 9) and the TV is

turned on, the unit automatically performs the Preset Download ( pg. 12) even if you select “AUTO” or “AUTO SET” for Auto Set Up function.

E Confirm/Set video channel.

With RF Connection The video channel that is shown on the display panel is your video channel. Press OK.

If you have selected

MAGYARORSZÁG, CESKÁ REPUBLIKA, POLSKA or

OTHER EASTERN EUROPE in step B on page 10, “2” appears instead of “1”.

To view picture signals from the unit, set your TV to the video channel.

With AV Connection Press PR – until the display panel shows “1 CH – –” (or

“2 CH – –”). Now the video channel is set to off. Then press OK.

ATTENTION

Once you have performed Auto Set Up, even if the unit’s memory backup has expired, all the stored stations and their Guide Program numbers remain in the unit’s memory and the unit will not perform Auto Set Up again. The unit performs only Auto Clock Set when the unit is turned on.

If you have moved to a different area, perform each setting as required.

Video channel setting (for RF connection users)  pg. 73

Tuner setting  pg. 68

Clock setting  pg. 74

If a new station starts broadcasting in your area, perform tuner setting ( pg. 68) and, if necessary, video channel setting ( pg. 73).

NOTES:

In areas where no TV station transmits a PDC (Programme Delivery Control) signal, the unit can perform neither Auto Clock Set nor Auto Guide Program Number Set.

If there is a power cut, or if you press 1 or SET UP MENU while Auto Set Up is in progress, Auto Set Up will be interrupted; be sure to turn off the unit power once and try again from step A.

Auto Clock Set may not function properly depending on the reception condition.

If no sound accompanies the picture or the audio sounds unnatural on some channels that have been stored by Auto Set Up, the TV system setting for those channels may be incorrect.

Select the appropriate TV system for those channels. ( pg. 70, “INFORMATION”)

After “Auto Set Up” is completed, perform “Monitor Set (DVD deck)” on page 14.

To view picture signals from the unit, set your TV to its AV mode.

Page 11
Image 11
JVC HR-XV3E manual Perform Auto Set Up, Confirm/Set video channel, On the front display panel