Filename [XV3EX_08DVD.fm]
Masterpage:Left+
34 EN
Page 34 22 August 2003 12:20 pm
OPERATIONS ON DVD DECK (cont.)
VFP function— Adjusting the picture quality
The VFP (Video Fine Processor) function enables you to adjust
the picture character according to the type of programming,
picture tone or personal preference.
NOTE:
Before you start operation;
The VFP setting screen disappears if no operations are done for
more than about 10 seconds. If the setting screen disappears
before you finish, start from step 1 again.
1Access the VFP setting menu.
2Select the VFP mode.
Press we repeatedly.
●Each time you press we, the VFP mode changes as follows:
NORMAL]CINEMA]USER1]USER 2](Back to the
beginning)
NOTE:
You cannot adjust the parameters of “NORMAL” and “CINEMA”.
To adjust picture appearance manually
3Access the USER menu.
4Select the parameter.
Press rt repeatedly to select a parameter you want to
adjust, then press OK.
●Adjust gradually and confirm picture appearance results are as
preferred.
●VFP menu disappears and the following pop-up window
appears on the TV screen.
5Adjust the parameter.
Press rt repeatedly to change the setting, then press
OK.
●The current VFP settings appear again.
6Adjust the other parameters.
Repeat steps 4 and 5 to adjust other parameters.
To return to the normal screen
Press DVD PI CTURE .
To activate your setting
Press DVD PICTURE, then press we repeatedly to select
“USER 1” or “USER 2” that you have changed the
parameters.
Press DVD PIC TURE during
playback.
●The current setting appears on
the TV screen.
NORMAL: Select this normally.
CINEMA: Suitable for movie.
USER 1/
USER 2:You can adjust parameters that affect picture
appearance and store settings. Go to step 3.
+0
NORMAL
GAMMA
BRIGHTNESS
CONTRAST
SATURATION
TINT
SHARPNESS
Y DELAY
+0
+0
+0
+0
+3
+0
Press we repeatedly to
select “USER 1” or “USER 2”.
GAMMA
(–4 to +4): Controls brightness of neutral tints while
maintaining brightness of dark and bright
portions.
BRIGHTNESS
(–16 to +16): Controls screen brightness.
CONTRAST
(–16 to +16): Controls screen contrast.
SATURATION
(–16 to +16): Controls screen colour depth.
TINT
(–16 to +16): Controls screen tint.
SHARPNESS
(+0 to +3): Controls screen sharpness.
Y DELAY
(–2 to +2): Controls screen colour gap.
+0
USER 1
GAMMA
BRIGHTNESS
CONTRAST
SATURATION
TINT
SHARPNESS
Y DELAY
+0
+0
+0
+0
+3
+0
+0
GAMMA

+0

GAMMA

XV3EX_01.book Page 34 Friday, August 22, 2003 12:21 PM