Niles Audio ZR-6 manual ZONE 4 PRE-OUT, ZONE 5 PRE-OUT, ZONE 6 PRE-OUT, System Configuration

SYSTEM CONFIGURATION

CONFIGURING THE ZR-6 MULTIZONE RECEIVER

ZONE 4 PRE-OUT

The ZR-6 MultiZone Receiver is equipped with Zone 4 pre-amplifi er outputs that enable the use of a separate outboard power amplifi er.

This must be confi gured on each slave as well as the master.

While in the confi guration mode (see above), press the Set button until the display shows [ZONE 4 PRE-OUT VARIABLE]. The default setting is for the preamplifi er outputs to be variable (the output level is controlled by the ZR-6 volume control).

Z O N E 4 P R E O U T

V A R I A B L E

To change these outputs to a fi xed volume level, press the Band button. The display will show [PRE-OUT 4 FIXED]. The Zone 4 Output is now set to +6dB relative to the selected source device input level.

Z O N E 4 P R E O U T

F I X E D

To continue to the next system confi guration step, Zone 5 Pre-Out, press the Set button once.

To save the settings and exit the confi guration mode, simultaneously hold down the Band and Set buttons. After the ZR-6 saves the information. [RELEASE BUTTONS TO CONTINUE] appears on the display. The ZR-6 will return to the normal operating mode.

ZONE 5 PRE-OUT

The ZR-6 MultiZone Receiver is equipped with Zone 5 pre-amplifi er outputs that enable the use of a separate outboard power amplifi er.

This must be confi gured on each slave as well as the master.

While in the confi guration mode (see above), press the Set button until the display shows [ZONE 5 PRE-OUT VARIABLE]. The default setting is for the preamplifi er outputs to be variable (controlled by the ZR-6 volume control).

Z O N E 5 P R E O U T

V A R I A B L E

To change these outputs to a fi xed volume level, press the Band key. The display will show [PRE-OUT 5 FIXED]. The Zone 5 Output is now set to +6dB relative to the selected source input level .

Z O N E 5 P R E O U T

FI X E D

To continue to the next system confi guration step, Zone 6 Pre-Out, press the Set button once.

To save the settings and exit the confi guration mode, simultaneously hold down the Band and Set buttons. After the ZR-6 saves the information, [RELEASE BUTTONS TO CONTINUE] appears on the display. The ZR-6 will return to the normal operating mode.

ZONE 6 PRE-OUT

The ZR-6 MultiZone Receiver is equipped with Zone 6 pre-amplifi er outputs that enable the use of a separate outboard power amplifi er.

This must be confi gured on each slave as well as the master.

While in the confi guration mode (see above), press the Set button until the display shows [ZONE 6 PRE-OUT VARIABLE]. The default setting is for the preamplifi er outputs to be variable (controlled by the ZR-6 volume control).

Z O N E 6 P R E O U T

V A R I A B L E

(CONTINUED ON NEXT PAGE)

38 NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 305-238-4373