Niles Audio ZR-6 manual SOLO-6MDKEYPAD, System Settings, Setting Up The Zone Keypads, Tech Tip

SYSTEM SETTINGS

SETTING UP THE ZONE KEYPADS

TREBLE ADJUSTMENT

A source device should be playing in the zone.

To set the Treble Adjustment:

1.Simultaneously press-and-hold the Mute key and the Master key 3 (middle left) for fi ve seconds. The Master key 3 LED will start blinking.

2.Press the Vol + key to increase the treble, or the Vol – key to decrease the treble.

3.To reset the treble to its default fl at setting, press-and- hold the Play/Pause key for fi ve seconds.

4.To save your changes and exit the confi guration mode, simultaneously press-and-hold the Mute key and the Master key 3 for fi ve seconds. The system will return to the normal operating mode.

5.Repeat these steps for the remaining zone keypads.

IR SENSOR ON/OFF

By default, the IR sensor is set to the on position.

To turn the Internal IR Sensor On or Off:

1.Simultaneously press-and-hold the Mute key and the Master key 2 (top right) for fi ve seconds. The Master key 2 LED will start blinking.

2.Press the Vol + key to turn the IR sensor on. Press the Vol – key to turn the IR sensor off.

3.To save your changes and exit the confi guration mode, simultaneously press-and-hold the Mute key and the Master key 2 for fi ve seconds. The system will return to the normal operating mode.

4.Repeat these steps for the remaining zone keypads.

VARIABLE LOUDNESS ON/OFF

By default, the variable loudness is set to the on position.

To turn the zone’s Variable Loudness On or Off:

1.Simultaneously press-and-hold the Mute key and the Master key 1 (top left) for fi ve seconds. The Master key 1 LED will start blinking.

2.Press the Vol + key to turn the variable loudness on. Press the Vol – key to turn the variable loudness off.

3.To save your changes and exit the confi guration mode, simultaneously press-and-hold the Mute key and the Master key 1 for fi ve seconds. The system will return to the normal operating mode.

4.Repeat these steps for the remaining zone keypads.

SOLO-6MD KEYPAD

Soft Keys
change depending
of Source	Hard Keys-
	same function
	regardless of Source

TECH TIP

The Solo-6MD features a combination of hard and soft keys. A hard key performs a single function

regardless of source device. For example, the Radio key always selects the radio to play. Soft keys are

different. The Solo-6MD has three soft keys located just below the LCD screen. Except the middle key, which has the Niles logo, the soft keys are unlabeled. The label for each soft key is in the LCD screen directly above and it changes based on the menu or operation mode the keypad is in.

KEYPAD SETUP

To enter the Keypad Setup mode:

1.Press-and-hold the Niles logo soft key (the middle key below the display) for three seconds. The Setup screen will appear.

2.Press the Vol + and Vol – keys to scroll through and highlight the menu options: “Audio Settings” and “Display Settings.”

NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 305-238-4373 53