Niles Audio ZR-6 manual Radio Preset Names, Saving A Preset Radio Station, System Settings

Models: ZR-6

1 104
Download 104 pages 26.77 Kb
Page 59
Image 59
CUSTOM IMAGE DISPLAY

SYSTEM SETTINGS

SETTING UP THE ZONE KEYPADS

CUSTOM IMAGE DISPLAY

The idle time (the length of time after the last key press) before the custom image is shown can be adjusted in Custom Image Display.

1.Adjust the Custom Image Display with the + key and the – key (5-60 seconds).

2.Press the box to the left of Hide Custom Image to always hide the custom image.

A checkmark will appear in the box. When the box is checked, the custom image will never be displayed.

NOTE: IT IS POSSIBLE TO SET THE BACKLIGHT TIMER TO TURN OFF BEFORE THE CUSTOM IMAGE IS SHOWN. IN THIS CASE, THE CUSTOM IMAGE WILL NEVER BE SHOWN.

VIRTUAL ROOM TIMEOUT

A TS-Pro can control any room in the system, but will revert back to its default room after a preset length of time.

1.Adjust the Virtual Room Timeout with the + and – keys (10-240 seconds).

RADIO PRESET NAMES

Any preset radio station can be custom named by station name, call letters, genre, etc. Once a custom name is created, it automatically appears on all other TS-Pro touchscreens in the system.

1.Press-and-hold the Niles Key for three seconds.

2.Select Radio Preset Names; the Setup Radio Preset Names menu will be displayed with all preset radio stations, their station frequency numbers, preset numbers, and if previously entered, custom names.

3.Find the radio preset station you wish to name. Use the Up and Down arrows to scroll to more stations.

NILES AUDIO CORPORATION – 1-800-BUY-HIFI305-238-4373

4.Press the radio preset station. A keyboard with capital letters will be displayed. Select abc to toggle to lower case letters. From the lower case letter keyboard, select ?123 to toggle to numerals.

5.Enter the desired radio preset name (up to 10 characters). You can delete a character or number by pressing the VIRTUAL ROOM TIMEOUT

key or delete an entire name by pressing and holding the RADIO PRESET NAMES key.

6.Press Save.

7.Press Back and repeat steps 3-6 to create another custom name.

8.When done, press Exit. The ZR-6 MultiZone Receiver will shut down for approximately 5 seconds, restart, and automatically transmit the new names to all TS-Pro touchscreens in the system.

SAVING A PRESET RADIO STATION

1.With the system on, press the Radio Source Select key.

2.Press the Tune key. The tuning screen is displayed.

3.Tune in the desired station and then press Add Preset.

4.Select a location for the preset station. There are 20 preset station locations. Use the

Up and Down arrows to scroll to an unused location or scroll to an existing preset station you would like to replace. Press the unused location or the existing preset station. The new station will appear in this location.

5.Press the Tune key to enter another preset station or press the Main key to return to the “Radio Now Playing” screen.

57

Page 59
Image 59
Niles Audio ZR-6 manual Radio Preset Names, Saving A Preset Radio Station, System Settings, Setting Up The Zone Keypads