Dialogic® SS7G2x Signaling Server SGW Mode User Manual Issue 4
6.14.4STCRP – Status C7 Route Print
Synopsis
This command shows the status of the specified SS7 route or range of routes within a network context. If no route or network context is specified, then the values for all routes are shown.
The command indicates whether a route is available or unavailable as well as indicating which routsets within the route are available or unavailable. The command also provides the congestion state of the route.
Possible ROUTE STATUS values are:
•
•
•
•
Available Unavailable
Available - The route is available for traffic to the remote point code of the route. Unavailable - The route is unavailable for traffic to the remote point code of the route.
Possible CONG LEVEL values are:
•
•
0 no congestion
1, 2 or 3 indicating the level of congestion
Possible LS1 STATUS and LS2 STATUS values are:
•
•
Available - The linkset on the route is available for traffic to the adjacent point code. Unavailable - The linkset on the route is unavailable for traffic to the adjacent point code.
Syntax
STCRP;
STCRP:NC=;
STCRP:C7RT=,NC=;
Prerequisites
None
Attributes
None
Examples
STCRP;
Output Format
CCITT SS7 Route Status |
|
|
| |||
C7RT | NC | DPC | ROUTE STATUS | CONG LEVEL LS1 STATUS | LS2 STATUS LABEL | |
1 | 1 | 1 | Available | 0 | Available |
|
2 | 1 | 2 | Available | 0 | Unavailable | Available |
64 | 4 | 99 | Unavailable | 0 | Unavailable |
|
EXECUTED
127
