Dialogic SS7G2X Snnai Sigtran Network Appearance Initiate, Snnae Sigtran Network Appearance End

Chapter 6 Command Definitions

6.13.7SNNAI – SIGTRAN Network Appearance Initiate

Synopsis

This command initiates a relationship between a Network Context and a Network Appearance on a per SIGTRAN link basis.

See Section 7.2, “Signaling Configuration” on page 136 for a more detailed description of SIGTRAN signaling configuration.

Syntax

SNNAI:NC=,SNLINK=,SS7MD=,NA=;

Prerequisites

•The SNLINK has been already initiated.

•The SS7MD associated with the NC cannot be different to a SS7MD associated with a NC anywhere else in the system.

•There is a one-to-one relation between NC and NA on a SNLINK.

•The NC cannot be the default value for this SNLINK.

•The SNTYPE of the SNLINK cannot be M2PA.

Attributes

CONFIG

Examples

SNNAI:NC=1,SNLINK=1,SS7MD=ITU14,NA=63;

6.13.8SNNAE – SIGTRAN Network Appearance End

Synopsis

This command ends a relationship between an NC and NA on a per SNLINK basis.

Syntax

SNNAE:SNLINK=,NC=;

Prerequisites

•The NC has already been initiated.

•The SNLINK has already been initiated.

•There is a configured relationship between NC and NA in this SNLINK.

•There are no unblocked ASs using this SNLINK and NC combination.

•If the SNLINK is unblocked, there are NA mapping in other Network Contexts for the SNLINK.

Attributes

CONFIG

Examples

SNNAE:SNLINK=1,NC=1;

118