Dialogic SS7G2X manual Remote Operations, Remote Operation Types

Dialogic® SS7G2x Signaling Server SGW Mode User Manual Issue 4

Table 2. Parameter Definitions (Continued)

Name	Description		Range	Notes
	Time of day in the format:
	xx:yy:zz	xx – 00 to 23
	where:
TIME		yy – 00 to 59
	• xx – 2 digit hour
		zz – 00 to 59
	• yy – 2 digit minute
	• zz – 2 digit second
TLO	Auto log off time (in minutes)	1 to 60		Default = 30
TLOW	Log off warning time (in minutes)	0 to 60		Default = 25
TMSEC	Timer values in milliseconds associated with	100 to 10000
		(in integer multiples
	a timer number (resolution is 100ms)
		of 100)
	Signaling system dependent timer number.
TO	As specified in the particular signaling	1 to 999
	system’s list of timers.
	A timeslot within a PCM interface on a board
	in the format:
	xx-y-zz	xx – 1 to 3
TS	where:	y – 1 to 4
	• xx = board position (BPOS)	zz – 1 to 31
	• y = PCM within a board
	• zz= Timeslot
TSEC	Timer values in seconds associated with a	1 to 3000
	timer number
	Timer Type	One of:
		•	MTP3
	See Section 5.3, “Signaling Gateway
TTYPE		•	MTP3A
	Timers” on page 38 for definitions of
		•	SCTP
	Signaling Gateway “CONV” specific timers.
		•	CONV
USER	User name	0 to 12
		<text character>

5.2Remote Operations

Table 3 gives the possible remote operation types.

Table 3. Remote Operation Types

DTYPE	Description
SOFTWARE	Selecting this operation allows the user to upload a new software version.
CONFIG	Selecting this operation allows the user to upload a previously backed up version of the
	configuration.
LICENSE	Selecting this operation allows the user to upload new software licenses.

37