Dialogic SS7G2X manual 2 C7LSC CCS SS7 Link Set Change

Chapter 6 Command Definitions

6.6.2C7LSC – CCS SS7 Link Set Change

Synopsis

This command allows changes to the configuration of an SS7 link set.

Syntax

C7LSC:LS=,{[OPC=,][DPC=,][LSSIZE=,][NC=,][NI=,]};

Prerequisites

•The SS7 link set has already been initiated.

•All configured SS7 links must be blocked.

Note: After blocking, an SS7 link cannot be unblocked until all the boards processing the SS7 signaling are blocked and then unblocked.

•The LSSIZE cannot be set to less than the number of links attached to the link set.

•DPC must be different across link sets.

•If SS7MD indicates a 14-bit Point Code, OPC and DPC must be less than or equal to 16383.

•Only one OPC can exist within a network context.

•The NC/DPC combination must be different for all link sets.

•The NC/OPC combination must be different for all link sets.

Attributes

CONFIG

Examples

C7LSC:LS=1,OPC=1,DPC=2,LSSIZE=2;

68