Chapter 6 Command Definitions
6.11.3RDCRE – Remote Data Centre Continuous Record End
Synopsis
This command ends a continuous record.
If DISCARD is set to Y, any data associated with the continuous record is discarded. If DISCARD is not set to Y, and if there is data awaiting transfer, the end continuous record is rejected.
Syntax
RDCRE:RECORD=,[DISCARD=Y];
Prerequisites
•
•
The report has already been initiated.
There is no continuous data associated with the continuous record.
Attributes
CONFIG
Examples
RDCRE:RECORD=1;
6.11.4RDCRP – Remote Data Centre Continuous Record Print
Synopsis
This command prints data relating to a continuous record for which collected data is transferred to a Remote Data Centre (RDC).
Syntax
RDCRP;
Prerequisites
None
Attributes
CONFIG
Examples
RDCRP;
Output Format
Remote | Data Centre Continuous Record |
|
|
| ||
RECORD | CRTYPE | PERIOD | MINREC | RDC1 RDC2 | LABEL | |
1 | ALARM | 00:05:00 | 100 | 2 | 1 | ALARM |
EXECUTED
100
