Dialogic SS7G2X manual Cntsp Configuration Timeslot Print

Chapter 6 Command Definitions

6.5.23CNTSP – Configuration Timeslot Print

Synopsis

This command is used to print the configuration of all timeslots on a PCM.

A timeslot on a PCM can be allocated to signaling, voice, cross connect, monitoring or it can be unallocated. Data is printed for a timeslot when it is acting as an outgoing timeslot.

A timeslot can act as an outgoing timeslot for the following types:

•SIG - Carries signaling information. It forms a duplex connection.

•OTS - Acts as an outgoing timeslot for a cross connection. It may form a duplex connection.

•STS - The outgoing timeslot monitoring the send direction of an object.

•RTS - The outgoing timeslot monitoring the receive direction of an object.

Note: An object is currently only a signaling link.

For signaling, the STS monitors information sent from the EQU of the signaling link and the RTS monitors information received by the signaling link.

Syntax

CNTSP:PCM=;

Prerequisites

None

Attributes

None.

Examples

CNTSP:PCM=3-3;

Output Format

PCM Timeslot		Configuration
TS	TYPE	C7LINK ITS
3-3-22	SIG	6
3-3-24	OTS	4-4-4
3-3-25	RTS	7
3-3-25 STS		8
EXECUTED

62