
Chapter 10 SS7G2x SNMP MIB
Chapter 10: SS7G2x SNMP MIB
The Signaling Gateway supports an SNMP version 1 managed agent to allow a remote management platform to interrogate the current alarm status of the Signaling gateway. Variables are supported from the MIB II system branch and from an enterprise MIB. The MIB provides
The MIB II system branch provides basic information about managed node, that is, the Signaling Gateway. The
SNMP support can be activated by setting the SNMP parameter to Y using the CNSYS command as follows:
CNSYS:SNMP=Y;
Then restart the system using:
MNRSI;
The user should then use their SNMP manager to communicate with Signaling Gateway using SNMP UDP port 161.
The content of the MIB is as follows:
| ||
| ||
| ||
The DataKinetics 4032 MIB | ||
|
--Management Information Base for SNMP Network Management on DataKinetics
--products.
--Copyright (C)
--The information in this document is subject to change without notice.
--Enterprise number is 4032.
|
|
|
| |
Date | By | Changes | ||
- First published release |
| |||
| ||||
IMPORTS |
|
|
|
|
enterprises |
| FROM |
| |
|
| FROM |
| |
|
|
|
|
--The DataKinetics enterprise node
datakineticsOBJECT IDENTIFIER ::= { enterprises 4032 }
dkMibVer
DESCRIPTION
"The current version of the MIB running on the agent. Currently the following values are recognised
0-
1-
2- First published release"
158