Dialogic® SS7G2x Signaling Server SGW Mode User Manual Issue 4
6.5.18CNSYP – Configuration System Print
Synopsis
This command is used to print the system configuration. The configuration items include the unit identity (UNIT ID), Software options and the unit's IP configuration.
Software options not licensed on the unit do not appear in the list. Most of these configuration items are set using the CNSYS command, which also contains more details of other options. The “Password” value shows “********” if a password is set and blank if a password is not set.
Syntax
CNSYP;
Prerequisites
None
Attributes
None
Examples
CNSYP;
Output Format
System Configuration
UNITID: | 0004238734ef |
SYSID: |
|
SYSREF: | 0 |
PASSWORD: | ******** |
FTPPWD: | N |
FTPSER: | Y |
SECURE: | N |
PER: | 0 |
IPADDR: | 172.28.148.99 |
SUBNET: | 255.255.255.0 |
IPADDR2: | 170.28.148.100 |
SUBNET2: | 255.255.255.0 |
IPADDR3: | 170.28.148.101 |
SUBNET3: | 255.255.255.0 |
IPADDR4: | 0.0.0.0 |
SUBNET4: | 255.255.255.0 |
GATEWAY: | 172.28.148.1 |
SNMP: | N |
SGW: | Y |
DSC: | N |
SIU: | N |
EXECUTED |
|
Note: The protocol and mode parameters are only present if licensed. When a protocol or mode is active, the parameter shows the value “Y”, and when inactive, the parameter shows the value “N”.
59
